C-HR KURL RACING body kit
轉自 http://kuhl-japan.com/gallery_e/?p=1133&bodykit=Complete%20setName and location of each part (Click to enlarge)
[*]Explanation Image is being prepared
ITEM NAMESG-type UnpaintedSG-type Painted
【BODY KIT3set】
FRONT SPOILER
SIDE STEP
REAR FLOATING DIFFUSER￥190,000￥270,000
FRONT SPOILER￥69,000￥95,000
SIDE STEP￥69,000￥105,000
REAR FLOATING DIFFUSER￥55,000￥75,000
REAR HALF SPOILER￥59,000￥85,000
REAR BUMPERDIFFUSERCOMING SOONCOMING SOON
CORNER SENSOR ATTACHMENT￥8,000￥15,000
FOGLAMP ATTACHMENT￥12,000￥20,000
ITEM NAMEHG-type UnpaintedHG-type Painted
【BODY KIT3set】
FRONT SPOILER
SIDE STEP
REAR FLOATING DIFFUSER￥230,000￥310,000
FRONT SPOILER￥79,000￥105,000
SIDE STEP￥89,000￥125,000
REAR FLOATING DIFFUSER￥65,000￥85,000
REAR HALF SPOILER￥69,000￥95,000
REAR BUMPERDIFFUSERCOMING SOONCOMING SOON
CORNER SENSOR ATTACHMENT￥8,000￥15,000
FOGLAMP ATTACHMENT￥12,000￥20,000
* All above mentioned items are black gel surface finishing and unpainted.
* Shipping charges are excluded.
* All above mentioned prices are in Japanese Yen.
C-HR BODYKIT concept
・Finally Kuhl Racing Body Kit for C-HR debut, which turns your C-HR into racing look!
Though it's spoiler type, Front Spoiler with deep and aggressive design gives great impact on the front view.
・Available on 2 grades; SG TYPE uses a special FRP material having 1.5 times more of strength than
conventional FRP material, and our top grade, HG TYPE uses the same material as SG TYPE,
but achieved 2 times more of strength by adding a newly developed cross mat.
・The leading edge FRP molding technique realizes to be the all parts designed as the easy and
replaceable fitting with the original parts without using double-sided tape.
・Aggressive designed Front Spoiler changes its original shape in almost 40% and
realizes sporting look. Securing enough space from the ground, it reduced
the thickness to the maximum while secured high strength. Just 15mm lower than
the original bumper enables to drive even a lowered car without any attention.
・The attachments for the original corner sensor and fog lamp are made and
sold separately to be able to install all the car grades.
・Aerodynamics diffuser style and wider look Side Step is involuted design with
more than 10cm depth to integrate with the car body. Even the bottom side
is molded more than 20cm, not to loose the aerodynamics. And for easy installation,
it was molded even on the back side for achieve higher strength with extra cost.
・Separated Rear Half Spoiler and Diffuser is ultra three dimensional shape with
having more than 20cm dept and realizes sporting look. Stunning three dimensional
and hollowed design also has higher functionality.
・The signature Rear Floating Diffuser rolls back largely to the back side,
and is able to be installed on the original rear bumper.
・Rear Spoiler is able to combine with center positioned Kuhl Slash Cut 2-End exhaust,
which has 100mm diameter, beautiful blue burned pipe.
・KUHL signature powder coated big wave aero net gives premium feel and at the same time,
achieves higher durability.
這是海拉風 ??
在台灣我不想開一開 空力套件分家 ...........
頁:
[1]